Hampton Bay 52 In. White Huntington III Ceiling Fan

Hampton Bay 52 In. White Huntington III Ceiling Fan Owners Manuals, User Guides, Instructional Help Documents & Operating Information - Hampton%20Bay%20Huntington%20III%2052%20in%20ceiling%20fan%20manual.pdf

Report DMCA / Copyright


  • 2MB
  • 16 Pages
  • 594.72 x 411.12 pts


Citation Text

52” Huntington III Ceiling Fan by Hampton Bay Quick-Install System 3-Speed Reverse Function for Year-Round Comfort and Savings Aero-Breeze™ Technology Moves up to 25% More Air Tri-Mount Installation

Thank you for purchasing this Hampton Bay ceiling fan. This product has been manufactured with the highest standards of safety and quality. The finish of this fan is weather resistant, but over time will naturally weather and fade.

Table of Contents Safety Rules................................... 1 Unpacking Your Fan..................... 2 Installing Your Fan....................... 3 Operating Your Fan...................... 11 Care of Your Fan........................... 12 Troubleshooting............................. 12 Specifications................................. 13


Before returning to your local Home Depot, please call our Customer Service Team at 1-877-527-0313 or visit www.homedepot.com.

Warranty Information.................. 14

Please reference your SKU (519 694 oil-rubbed bronze) or UPC (82392 810528 oil-rubbed bronze). UL Model No. EF200DA-52


1. To reduce the risk of electric shock, insure electricity 2.

3. 4. 5.

6. 7.

has been turned off at the circuit breaker or fuse box before beginning. All wiring must be in accordance with the National Electrical Code ANSI/NFPA 70-1999 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician. WARNING: To reduce the risk of fie or electrical shock, do not use this fan with any solid-state fan speed control device. CAUTION: To reduce the risk of personal injury, use only the screws provided with the outlet box. The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 35 pounds. Use only UL Listed outlet boxes marked “FOR FAN SUPPORT.” The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor. Do not operate reversing switch while fan blades are in motion. Fan must be turned off and blades stopped before reversing blade direction. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY, MOUNT FAN TO OUTLET BOX MARKED “ACCEPTABLE FOR FAN SUPPORT” WITH THE SCREWS PROVIDED WITH THE OUTLET BOX. MOST OUTLET BOXES COMMONLY USED FOR THE SUPPORT OF LIGHTING FIXTURES ARE NOT ACCEPTABLE FOR FAN SUPPORT AND MAY NEED TO BE REPLACED. CONSULT A QUALIFIED ELECTRICIAN IF IN DOUBT.

8. Avoid placing objects in path of the blades.

9. To avoid personal injury or damage to the fan and

other items, be cautious when working around or cleaning the fan. 10. Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most cleaning. 11. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box. 12. Electrical diagrams are for reference only. Light kits that are not packed with the fan must be UL listed and marked suitable for use with the model fan you are installing. Switches must be UL general use switches. Refer to the instructions packaged with the light kits and switches for proper assembly. Use 14W MAX. BULBS (supplied). 13. All set screws must be checked and tightened where necessary before installation TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE BRACKETS (ALSO REFERRED TO AS “FLANGES”) DURING ASSEMBLY OR AFTER INSTALLATION. DO NOT INSERT OBJECTS IN THE PATH OF THE BLADES. PLEASE REMOVE RUBBER MOTOR STOPS ON THE BOTTOM OF THE FAN BEFORE INSTALLING BLADES OR TESTING MOTOR.

Safety Rules 1.






5 7



Unpack your fan and check the contents. You should have the following items: 1. Fan Motor Assembly with Pre-Attached Blade Brackets and Light Fixture 2. Canopy with “Slide-On” Ceiling Mounting Plate 3. Blades (5)

4. 5. 6. 7.

Glass Shades (4) Ball/downrod Assembly Bu