Casio G-Shock Tough Solar GW-3000BD-1AJF GW-3000BD-1 Multiband 6 Mens Watch - qw5121.pdf

Casio G-Shock Tough Solar GW-3000BD-1AJF GW-3000BD-1 Multiband 6 Mens Watch Owners Manuals, User Guides, Instructional Help Documents & Operating Information - qw5121.pdf

Report DMCA / Copyright


  • 1012KB
  • 6 Pages
  • 595 x 842 pts (A4)

Recommend PDFs


Citation Text


Operation Guide 5121 Power Levels

Congratulations upon your selection of this CASIO watch.



This watch does not have a city code that corresponds to the UTC offset of –3.5 hours. Because of this, the radio-controlled atomic timekeeping function will not display the correct time for Newfoundland, Canada.

5 @ Moves at two-second intervals.

About This Manual B @ +

Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss suffered by you or any third party arising through the use of this product or its malfunction.

Button operations are indicated using the letters A through D shown in the illustration.

Level 1

Hand Movement Normal.

Function Status All functions enabled


x Second Hand moves at two-second intervals. m Day changes to 1 (home position).

Beeper, time calibration signal reception disabled


x Second Hand stopped. z Hour Hand and c Minute Hand stopped at 12 o’clock.

All functions disabled

Hand Functions

> *

6 5

You can get an idea of the watch’s power level by observing the movement of the x Second Hand in the Timekeeping Mode. • If the x Second Hand is moving normally at one-second intervals, power is at Level 1. • If the x Second Hand is moving at two-second intervals, power is at Level 2, which is quite low. Expose the watch to light as soon as possible so it can charge.

z x c v

Hour Hand Second Hand Minute Hand Left Dial Hand: Indicates the current day of the week and current mode. b 24-hour Hand: Indicates the current 24-hour timekeeping hour.

n Right Dial Hands: Indicate a time, in 24-hour format, depending on the current mode. m Day This User’s Guide uses numbers shown above to identify watch hands and indicators.

Things to check before using the watch 1. Hold down C at least two seconds to enter the Timekeeping Mode, and then observe the movement of the x Second Hand.

Is the x Second Hand moving at two-second intervals or is it stopped completely?

YES The watch is charged sufficiently. For details about charging, see “Charging the Watch”.

YES Power is low. Charge the watch by placing it in a location where it is exposed to light. For details, see “Charging the Watch”.

Power Recovery Mode The watch is designed to go into a power recovery mode that stops hand operation temporarily whenever power suddenly drops below a certain level due to overuse of the alarm tone over a short period. Note that all operations are disabled while the watch is in the power recovery mode. The hands will move to the correct positions and the watch will resume normal operation after power recovers (in about 15 minutes). Putting the watch in a location where it is exposed to light will help power to recover sooner.

Charging Times

Is the x Second Hand moving smoothly at one-second intervals? NO

• When power drops to Level 3, all functions will be disabled but the watch will continue to keep time internally for about one week. If you recharge the battery sufficiently during this period, the analog hands will move automatically to the correct setting and regular timekeeping will resume. After one week, all settings (including timekeeping) will be cleared. Recharging the battery will reset all settings to their initial factory defaults.

NEXT Go to step 2.

Exposure Level (Brightness)

2. Check the Home City and the daylight saving time (DST) setting.

3. Set the current time. • To set the time using a time calibration signal See “To get ready for a receive operation”. • To set the time manually See “Configuring Current Time and Date Settings Manually”. The watch is now ready for use. • For details about the watch’s radio contr olled timekeeping feature, see “Radio Controlled Atomic Timekeeping”.

Charging the Watch

8 minutes

2 hours

24 hours

6 hours

90 hours

Window sunlight on cloudy day (5,000 lux)

48 minutes

8 hours


8 hours

92 hours


* 1 Approximate exposure each day to generate power for normal daily operation. * 2 Approximate exposure to take power up one level. • The above times are for reference only. Actual times depend on lighti