2 Front Load Washer

Whirlpool AWM5145/2 Front Load Washer Owners Manuals, User Guides, Instructional Help Documents & Operating Information - C:\Users\Debs\Desktop\Personal Doc's - pdf's, ebooks, etc\my pdf's\washin machine manual_IFU.pdf

Report DMCA / Copyright

DOWNLOAD PDF

  • 305KB
  • 14 Pages
  • 499 x 697 pts
  • 116 Downloads
  • 149 Views

Recommend PDFs

 

Citation Text

CONTENTS BEFORE USING THE WASHING MACHINE PRECAUTIONS AND GENERAL RECOMMENDATIONS DESCRIPTION OF THE WASHING MACHINE DOOR CHILD SAFETY (IF AVAILABLE) BEFORE THE FIRST WASH CYCLE PREPARING THE WASH DETERGENTS AND ADDITIVES REMOVING THE FILTER DRAINING RESIDUAL WATER CARE AND MAINTENANCE TROUBLESHOOTING GUIDE AFTER-SALES SERVICE TRANSPORT/HANDLING ELECTRICAL CONNECTION

BEFORE USING THE WASHING MACHINE 1.Remove the packaging and check

6.Electrical connections

• After unpacking, make sure that the washing machine is undamaged. If in doubt, do not use the washing machine. Contact After-Sales Service or your local retailer • Check that the accessories and supplied parts are all present • Keep the packing material (plastic bags, polystyrene parts, etc.) out of reach of children, as they are potentially dangerous

• Electrical connections must be carried out by a qualified technician in compliance with the manufacturer’s instructions and local safety regulations • Data concerning voltage, consumption and fuses are located on the inside of the appliance door • The appliance must be connected to the mains exclusively by means of a socket with an earth connection in accordance with established regulations. The washing machine must be earthed by law. The manufacturer declines all liability for damage to property or injury to persons or animals due to non-compliance with the directions given above • Do not use extension leads or multi sockets • Before any maintenance on the washing machine disconnect it from the mains supply • Access to the mains plug or to disconnection from mains supply via a double-pole switch must be ensured at all times following the installation • Do not operate the washing machine if it has been damaged during transport. Inform the After-Sales Service • Mains cable replacement is only to be carried out by After-Sales Service • The washing machine must only be used in the household for the prescribed uses

2.Remove the transport bolts • The washing machine is fitted with a transport bolts to avoid any possible damage to the interior during transport. Before using the washing machine, it is imperative that the transport bolts are removed

3.Install the washing machine • Remove the protective foil from the control panel • Move the appliance without lifting it by the worktop • Install the appliance on a solid and level floor surface, preferably in a corner of the room • Make sure that all four feet are resting firmly on the floor and check that the appliance is perfectly level (use a spirit level)

4.Water inlet

Minimum housing dimensions:

• Connect the water supply inlet hose in accordance with regulations of your local water company Cold water only • Water inlet: 3/4” threaded hose connection • Tap: • Water Pressure (flow pressure): 100-1000 kPa (1-10 bar)

Width: Height: Depth:

600 mm 825 mm 600 mm

5.Drain hose • Connect the drain hose to the siphon or hook it over the edge of a sink by means of the “U” bend supplied • If the washing machine is connected to a built-in pumping out system, ensure that the latter is equipped with a vent to avoid simultaneous loading and draining of water (siphoning effect)

19

PRECAUTIONS AND GENERAL RECOMMENDATIONS 1.Packaging

3.General recommendations

• The packaging is 100% recyclable and is marked with the recycling symbol. Adhere to current local regulations when disposing of packaging material

• Do not leave the washing machine connected when not in use • Turn off the tap • Before any cleaning and maintenance switch off the machine or disconnect it from the mains • Clean the outside of the washing machine with a damp cloth. Do not use abrasive detergents • Never open the door forcibly or use it as a step • Children must not be allowed to play with the washing machine or to climb into the drum (see also the following page chapter “Child Safety”) • If necessary, the power cable may be replaced with an identical one obtained from our AfterSales Service. The power cable must only be replaced by a qualified technician

2.Disposing of packaging and old washing machine